EarthQuaker Devices Stereo Easy Listening

Stereo Easy Listening is a compact, meticulously voiced stereo analog amp simulator with zero latency and no harsh digital artifacts. It’s an end-of-chain gateway to creative freedom—whether you’re tracking in a quiet bedroom, practicing on the move, or plugged straight into a PA. Use it as a standalone analog alternative to digital modeling, or to inject some analog character into a digital modeling setup. Simply put, it’s a box that pulls you out of the box.

Active Three-Band EQ
Stereo Easy Listening’s foundational voice pulls from the enduring, mid-scooped warmth of a classic American amplifier. Thanks to an Active Three-Band EQ with dedicated Bass, Middle, and Treble controls, you can venture beyond those borders and effortlessly dial in endless timeless tones.

Flexible Routing
This pedal is stereo AF. Plug into the dual ¼” inputs and send a glorious stereo spread to front-of-house or your DAW via dual XLR outputs, straight to your headphones, or all the above. Running mono? Plug into the Left input and Stereo Easy Listening automatically converts your signal to stereo, giving you the massive sound of two separate amps.

Aux Input
Featuring a dedicated level control that bypasses the preamp and cabinet simulator circuitry, the Aux Input is the perfect tool for practice or performance. Plug in your phone to shred along with your favorite tracks through headphones or send in drum machines and backing tracks and control the mix right from the stage.

Controls
Level: Master volume control.
Aux: Volume control for the Auxiliary input. The Auxiliary input bypasses the preamp and cabinet simulator circuitry. 
Bass: Cut and boost frequencies up to 500 Hz.
Middle: Cut and boost frequencies from 500 Hz to 2 kHz. 
Treble: Cut and boost frequencies from 2 kHz and up.
Inputs: True stereo inputs via the left and right ¼" jacks. For mono input, use the Left input only. 
Outputs: Stereo ¼" TRS headphone out, Left and Right XLR outs.

SPECIFICATIONS

Dimensions: 5.00 x 2.75 x 2.50 in. (127 x 70 x 64 mm) with knobs
Current Draw: 200 mA
Input Impedance: 1 MΩ
Headphone Output Impedance: 10 Ω
XLR Output Impedance: 100 Ω

Power
This device takes a standard 9 volt DC power supply with a 2.1mm negative center barrel. We always recommend pedal-specific, transformer-isolated wall-wart power supplies or multiple isolated-output supplies. Pedals will make extra noise if there is ripple or unclean power. Switching-type power supplies, daisy chains and non-pedal specific power supplies do not filter dirty power as well and let through unwanted noise. DO NOT RUN AT HIGHER VOLTAGES!