Positive Grid Spark CAB 2 Black

140W Powered FRFR Speaker Cabinet
The rig expander for Spark – turn any Spark amp into a full rig with 140 Watts of clean, full-range power. Redesigned inside and out with re-tuned acoustics and an upgraded signal path, it delivers robust volume and clarity. Also use it as a full-range cab for any line-level modeler, pedal, or amp you already play.

FEATURES

• A 140W powered FRFR cabinet design matched for Spark 2

• Turn any Spark amp into a full rig

• Re-tuned acoustics and an upgraded signal path for room-filling sound

• Powers and charges the whole Spark amp family from a single outlet

• XLR/TRS inputs and balanced XLR output with independent volume control

Turn up. Way up.
Spark CAB 2 adds 140 watts of clean, full-range power to any Spark amp. Redesigned inside and out, it delivers the volume and clarity for home, rehearsal, and the stage—and works just as well with any other rig.

Get the Highlights

• Redesigned & upgraded.
  Re-tuned acoustics and a finish matched to Spark 2.

• Room-filling sound.
  140 watts of full-range power.

• One power hub.
  Powers and charges the whole Spark amp family from a single outlet.

• Plays with everything.
  A dedicated Spark input, plus standard connections for any other rig.

Built to stack.
Redesigned inside and out. Spark CAB 2 features re-tuned acoustics that bring more detail and clarity, and refined electronics that stay composed as you turn it up.

• Made to match
  Designed to pair with Spark 2, in Black and Pearl.

• Road-ready
  A solid wood cabinet with recessed side handles and a tidy cable tie.

Connect your Spark. Or plug in your rig.
At home, on stage, or in the studio, Spark CAB 2 takes your Spark through a dedicated input
and opens up to everything else you play, from modelers and floorboards to amp sims and any
line-level source

Hear it. Send it.
Send Spark CAB 2's sound to the front of house through its balanced XLR output, and use it on
stage as your personal monitor at the same time. With independent volume controls, you set
what you hear and what the room hears separately.

• Spark input
  Dedicated 3.5mm stereo input, with input selector.

• Pro connections
  XLR/TRS combo inputs and a balanced XLR output.

• Independent volume
  Speaker Volume sets the cabinet, Line Out Volume sets the output to the PA.

Full-range power.
Power that makes your Spark sound as big as it feels in your head. Every note, every chord,
and every solo comes through full and alive, with headroom to spare.

• Loud and clear
  Your tone through a 10" woofer and two 1" tweeters, full and clear from the low end to the top.

• Sound solutions
  Contour and Ground Lift switches for sound balance and quiet operation.

Powers your whole Spark rig.
One wall outlet runs the whole setup, powering and charging the rest of your Spark gear.

• DC output
  Powers Spark 2 and Spark 40.

• USB-C output
  Powers and charges Spark MINI, GO, and PEDAL, and handles firmware updates.

Give Your Tone Some Muscle.

SPECIFICATIONS

Audio Specifications
Frequency Range: 45-20,000 Hz
Stereo/Mono: Mono
Maximum Sound Pressure Level: 118 dB (RMS), 121 dB (Peak)
Cabinet Principle: Bass Reflex
Power Amplifiers: 140W (RMS), 400W (Peak) Class D
Speakers: 1x10-inch woofer, 2x1-inch tweeter
Total Impedance: 4 ohms

Power
Main Input Power: AC 100-240V
DC Power Output (for Spark 2 & Spark 40): DC 20V/2.5A
USB-C Power Output (for Spark MINI, GO & PEDAL): DC 5V/2A

Controls and Connectivity
Back Panel Controls:

• Input Selector - Switch between the 3.5 mm Spark Input and the two mono XLR/TRS Combo Inputs

• Speaker Volume

• Line Out Volume

• Ground Lift Switch

• Contour Switch - Boosts low and high frequencies to improve balance at low volumes

Wired Connectivity:

• 1 x 3.5mm dedicated stereo Input for Spark Amp

• 2 x mono XLR/TRS combo inputs

• 1 x mono XLR balanced output

Box Contents:

• Spark CAB 2

• Quick Start Guide

• AC Power Cord

• DC Power Cable

• DC Power Cable Adapter for Spark 2

• 3.5mm Audio Stereo Cable

Physical Unit
Dimensions: 492.5 x 399.8 x 255 mm (with rubber feet) / 19.39 x 15.74 x 10.04 in
Weight: 13.5 kg / 29.76 lbs

Grille Cloth: Woven
Handle: 2 recessed speaker handles on the sides
Cable Tie: 1 adjustable cable tie for fixing instrument and audio cables on the back

For more information, click here to visit the manufacturers website.