Radial Power-1

240V Surge Suppressor & Power Conditioner
The Radial Engineering Power-1 220-240V is clean power conditioning unit in a rugged rackmount enclosure, providing anyone with valuable electronic gear and audio equipment with superior filtering against interference along with peace-of-mind surge protection.

FEATURES

• 220-240V operation for international markets

• Made in USA ‘MOV’ (Metal-Oxide Varistor)

• High rejection RF interference filter

• Front panel USB charging port

• Built ‘Radial tough’ to handle years of touring use

Front Panel Outlets
These outlets are always on, even when the front panel on/off switch is set to 'off'. When using the Power-1 as a power source for equipment racks, this allows you to easily connect and charge devices without powering on the whole rack.

USB Charging Port
5V/1A USB charging port for mobile devices such as smartphones and tablets. Type-C USB connection.

Fault Protection Indicator
This LED illuminates when the Power-1's Metal Oxide Varistor (MOV) is actively working, providing fault protection against varying currents.

On/Off
Large rocker switch with backlit LED activates the ten rear panel power outlets.

Power Input
IEC receptacle for connection to the AC main 220-240V power source.

Circuit Breaker
The Power-1 is rated for 10A of current, if this load is exceeded the circuit breaker will pop to help prevent damage to the Power-1 and connected devices.

Rear Panel Outlets
Ten rear power outlets are provided, in two groups of give. These power outlets are controlled by the front panel on/off switch.

Designed without compromise by Radial
Radial power clean surge suppressors give musicians, engineers, producers, studio owners, commercial facilities, and anyone working with valuable electronic equipment protection from power surges that can damage or destroy music equipment instantaneously. Ten rear panel outlets are provided along with three front panel outlets and a USB charging port to easily power personal devices. A heavy-duty power on/off switch, rugged outlet connectors, and steel construction ensure that the Power-1 performs night after night without fail. The Power-1 220-240V is designed for international markets that utilize a power grid at 220, 230 or 240V, and 50/60Hz.

Low noise, High level of confidence
Unlike competitive products that utilize low quality MOV's (Metal Oxide Varistor) for surge protection, all Radial Power units are built using a USA made MOV. This critical component has been proven to offer superior thermal protection and have a much longer lifespan than the alternatives. The Power-1 utilizes shunt mode technology and are non-ground contaminating for lower system noise. A high-rejection RF interference filter is used to keep high frequencies and AM radio signals out of the power line, preventing contamination of audio signals.