sE Electronics FluxCore FCA1 Ultra-HiZ Active DI
Active DI Box
FluxCore Series - The Purest Path From Instrument To Console
Engineered for pristine signal integrity and dependable performance, the FluxCore Series combines clean, uncompromised sound with thoughtful design. Non-slip pads and hook-and-loop pedalboard mounting keep your setup securely in place, while flexible rack-mounting options offer a clean, organized solution for any rig. Built for the studio, stage, and beyond.
FCA1 Ultra-HiZ Active DI - Hear Your Instrument. Nothing else.
Capturing Every Detail, Exactly as Intended.
Designed for exceptional clarity and signal integrity, the FCA1 features switchable input impedance up to 10 MΩ to preserve the natural character of your instrument. Its integrated DYNAMITE gain boost delivers up to +30 dB of ultra-clean gain, giving you added flexibility without compromising your sound.
Recommended Use: A wide range of instruments and high-impedance sources, including guitars, basses, piezo-equipped instruments, keyboards, and more.
FEATURES
-
Switchable Ultra-HiZ input of up to 10 MΩ
-
Integrated DYNAMITE gain boost delivering +15 dB or +30 dB of ultra-clean gain
-
Custom-designed, shielded heavy-duty transformer for high headroom, low distortion, and exceptional sound quality
-
on⁺ Ground Lift circuitry to minimize hum and radio-frequency interference
-
Flexible mounting options for desktops, pedalboards, gig racks, and stage setups
-
Rack-mountable design accommodates up to four units in a single 1U rack space
Front and Rear +48 V LEDs
Check phantom power status from either side of the FCA1, making it easier to see your power status in different setups.
Switcable Attenuation Pad
Choose 0, -15, or -30 dB attenuation to reduce the input signal level when connecting high-output sources, such as guitar and bass amplifiers.
Switchable Ultra-HiZ Input
With up to 10 MΩ of input impedance, the FCA1 preserves the natural tone, dynamics, and frequency response of passive guitar pickups, piezo-equipped instruments, and other high-impedance sources.
Integrated Dynamite Gain Boost
Add +15 dB or +30 dB of ultra-clean gain directly at the source, helping preserve signal quality before long cable runs or in electrically noisy environments.
Polar Switch
Fine-tune your signal chain with switchable polarity inversion. Helps resolve phase-related issues when combining multiple sources or blending a direct signal with a miked amplifier.
on⁺ Ground Lift
Designed to help minimize hum, ground loops, and radio-frequency interference, on⁺ Ground Lift circuitry helps keep your signal clean in demanding audio setups.
Shielded Heavy-Duty Transformer
The custom-designed, shielded heavy-duty transformer is engineered for high headroom, low distortion, and exceptional sound quality—helping preserve the integrity of your signal.
Flexible Mounting Options
Set up on a desktop, secure the FCA1 to a pedalboard, stack units on stage, or mount up to four units in a single 1U rack space.
SPECIFICATIONS
Electrical
Type: Active DI
Gain: 0 dB / +15 dB / +30 dB
Attenuation pad: 0 dB / -15 dB / -30 dB
Frequency range: 10 Hz – 80 kHz (-0.3 dB)
Powering: 48 V phantom power (IEC 61938)
Electrical output impedance: 60 Ω
Input impedance (ATT PAD 0 dB): 10 MΩ / 100 kΩ / 10 kΩ (switchable via LOAD)
Input impedance (ATT PAD −15 dB): 12 kΩ
Input impedance (ATT PAD −30 dB): 10 kΩ
Max input level (ATT PAD 0 dB, 0.5% THD): 8 dBV (2.75 V)
Max input level (ATT PAD −15 dB, 0.5% THD): 24 dBV (15 V)
Max input level (ATT PAD −30 dB, 0.5% THD): 39 dBV (87 V)
Recommended load impedance: Greater than 1 kΩ
Connectivity
Input: 6.3 mm (1/4") TS jack
Thru: 6.3 mm (1/4") TS jack
Output: 3-pin male XLR connector
Dimensions
Dimensions (L × W × H): 127 × 100 × 39 mm (5.0 × 3.9 × 1.5 in.)
Weight: 795 g (1.75 lbs.)
What's in the box:
-
FCA1 DI box
-
Non-slip mat
-
Hook-and-loop mounting pads
-
4 rack-mount screws
For more information, click here to visit the manufacturers website.

More info