sE Electronics T1

Titanium makes the difference

Meet the T1, the latest addition to our renowned range of large-diaphragm true-condenser microphones. This cardioid-only version of the multi-pattern T2 comes with the same sleek design, ultra-fast transient response and warm, smooth sound, making it an ideal choice for a wide variety of applications such as piano, percussion instruments and bass cabinets.

FEATURES

• The cardioid-only version of the renowned T2

• The very same hand-crafted twin 1“ titanium-sputtered brass capsule as the T2

• Titanium-sputtered true condenser cardioid capsule

• Accurate definition and fast transient response

• Built roadworthy with all-metal housing

• Innovative close-miking shockmount

• 80 / 160 Hz low-cut filters and -10 / -20 dB pads

• Available in a matched-pair configuration

Recommended Use: Drums, percussion, overheads, hi-hats, orchestral + strings, piano, bass guitar cab, acoustic guitar, electric guitar cab, vocals, woodwinds, brass

Hand-Crafted 1" True Condenser Cardioid Capsule
Featuring the very same handcrafted twin 1“ titanium-sputtered brass capsule as the T2 - the T1 is a true workhorse that delivers incredible results on a wide array of sources. Titanium is 33% stiffer and more than 300% lighter than gold, resulting in a faster transient response, perfect for capturing sources that thrive on attack such as drums, cymbals, hand percussion, and upright bass just to name a few applications. The T1 is especially outstanding in live environments as a factory matched-pair for overheads or instrument spot mic applications.

Pure and Simple. No Frills. Just Great Sound.
Classic sound meets modern craftsmanship in its simplest form; the T1 is a cardioid version of the renowned T2. With cardioid being the most common polar pattern utilized in both live and studio applications, the T1 prioritizes the features you really need, putting the smooth sound character of classic condensers in the palm of your hand.

Switchable Pre-Attenuation Pad & Bass-Cut Filter
With its integrated attenuation pad and low-cut filter, the T1 compensates for loud sources, easily taming excessive low-frequency rumble or proximity effect, providing the necessary extended dynamic range and roll-offs needed to dial in your sound at its source.

Dent-Proof Metal Housing & Premium Finish
Hand-crafted with the highest attention to detail, built with a dent-proof die-cast all-metal housing, metal switches, a rugged spring steel wire mesh grille, and a premium finish. The T1 is roadworthy, ready to handle the day-to-day life of touring professionals and years of demanding studio use.

Also Available As A Matched Stereo-Pair
Each T1 Matched-Pair is rigorously tested, tuned in-house and sonically matched to ensure a virtually identical frequency response for balanced, consistent sound. Complete with a metal mic case, stereo bar, two shockmounts and two T1 microphones.

SPECIFICATIONS

Components
Capsule: Hand-crafted 1" titanium-sputtered true condenser
Diaphragm: Titanium-sputtered mylar

Power
Electrical impedance: 125 Ohms
Connectivity: 3-pin male XLR connector
Powering: 48V Phantom power (P48 according to IEC 61938)

Sound
Polar patterm: Cardioid
Frequency range: 20 Hz - 20 kHz
Sensitivity: 25 mV / Pa (-32 dBV)
Max SPL: 137 / 147 / 157 dB (0/10/20 dB Attenuation Pad - 0.5% THD)
Equivalent noise level: 9 dB(A)
Signal to noise ratio: 85 dB
Low-cut filter: 80 / 160 Hz, 6 dB/Oct, switchable
Attenuation pad: 10 / 20 dB, switchable

Dimensions
Mic weight: 290 g (10.23 oz.)
Mic length: 146 mm (5.75 in.)
Mic width: 29 mm (1.10 in.)

What's in the T1 box:

• T1 microphone

• Custom shockmount + thread adapter

• Metal case

For more information, click here to visit the manufacturers website.